Showing posts with label Wood Vases. Show all posts
Showing posts with label Wood Vases. Show all posts

Tuesday, May 29, 2012

A bit late in posting, but here is the manzanita burl you last saw in work on my lathe.
It's 16" x 14" x 5" and available at the Paul Baliker Gallery in the Hammock.






Monday, April 2, 2012

Live Oak Bark Edge Bowls

I was looking at a house for sale and noticed a fellow across the street using a power pruner to cut up a live oak trunk about 8" in diameter.  "Ah Ha!" I thought, knowing I was running short of fresh turning stock.  It turned out he was not cutting it up for firewood and was something of a woodturner himself, but was spending most of his time on other projects.  A few minutes later it was in the back of my pickup and on its way home.

Here's the result so far... about a dozen bark edge bowls drying and nearly ready to sand and finish.

Monday, March 19, 2012

More Manzanita Root Burls Finished

Finished three more manzanita root burl turnings.  Two are suspended bowls, and one is somewhat more conventional.  The natural beauty of this wood is absolutely terrific!







Wednesday, February 8, 2012

Tuesday, February 7, 2012

Time to Cleanup!

When I get a load of fresh turning stock it's best to take care of it right away to avoid checks and cracks.  When that time happens it produces a lot more than a few rough turned bowls.
Mulch for the Garden Paths

Friday, February 3, 2012

Box Elder Bowl

Box elder, a type of maple with little or no commercial value, often has some spectacular red coloring that most associate with the tree's response to injury from the box elder beetle.  What you need to know if you collect work made from box elder is that the spectacular red color is photo reactive and will fade in ultraviolet light.

You can read more in the documents on my website.  RickUrbanWoodturner.com


This is a recently finished textured bowl about 8" in diameter with a bit of turquoise filling a natural void.  It is available for sale.

Saturday, January 28, 2012

Sweetgum from the Woodturning Archives

From the 2010 archives this vessel was turned from spalted sweetgum from north Georgia.  It's approximately 11" in diameter and  is turned cross grain (with the log chunk spinning end over end).  Natural cracks were filled with black tinted epoxy and the rim was textured before finishing with lacquer.